This page requires frames. Please call 510-794-5520 for assistance.
PROPRIETARY INFORMATION: This document contains proprietary information of the author and may not be used for purposes other than that for which it was originally furnished except with written permission of the author.
My name is Peter Dufresne Sr and I'm pleased to announce we can offer a
permanent low cost solution that will keep water levels extremely low in
your Aero Derivative lubricant reservoir. By removing and maintaining
extremely low water levels and by eliminating atmospheric metal ion
ingression, we can make your systems run better guaranteed.
In my previous life, I worked for over 30 years with TransCanada, where
I eventually became Manager of a fleet of 229 Aero Derivative turbines.
With the excellent support of dedicated plant staff we were able to
solve a number of lubricant issues. 15 years ago, I left and started a
company called EPT to specialize in delivering solutions to turbine
We have 2 solutions directly applicable to Aero Derivative users:
1. TMR, Total Moisture Removal systems take small volumes of regular
compressed air and drop the dew point to -90F. 1 SCFM of this purified
and extremely dry gas is then passed across the headspace of the
reservoir and vented out the breather element. These low maintenance
systems will reduce reservoir water levels to <150ppm which is ideal for
units that are not operating every day. A very important secondary
benefit is that by placing the headspace under very slight positive
pressure, you eliminate the ingression of atmospheric metal ion
contamination from salt water, agriculture, or industrial environments.
Metals ions are a strong catalyst that can significantly increase the
lubricant breakdown cycle. EPT's TMR systems are $3,500 and offer
tremendous value to aero derivative users. Additional information can be
found at http://www.cleanoil.com/products/tmr-water-removal-system.html
2. ICB, Ion Charge Bonding Filtration Carts are used to remove acids
and other soluble oxidation by products that create varnish. ICB carts
can also be packaged with a TMR which was described above. ICB
Filtration Carts are normally sized for 0.5 or 1GPM and installed in a
kidney loop format to the reservoir. Our ICB systems will maintain AN
values at very low levels and maintain good fluid solubility reducing
the deposit forming tendency of degraded lubricants.
We normally sell out our production schedule at year end, so please let
us know before the rush so we can supply before the end of the year.
If you have any questions or would like further information, please call
Yours Very Truly,
Peter Dufresne Sr
Rethink - Remove - Restore
More information available at www.cleanoil.com
Hostmaster, please convert this message to a live link to my web site,
http://www.cleanoil.com/products/tmr-water-removal-system.html, in the
Advertise Forum archive.
=================== Users-Groups.com Instructions ====================
Username: Your Email Address
Password: You defined it in the Member Profile (if not, see below)
LMS100 HOME PAGE
Use the black navigation bar to access the drop down menus to
manuver around the site.
LMS100 MEMBER PROFILE
Access the Member Profile via the LMS100 Home Page.
Establishing a Member Profile
Use method 2 if you established a Member Profile in a different User
Group; otherwise, use method 1.
1) Membership | User | New Candidate
2) Membership | User | New Candidate Importing Contact Info
Terminating Membership (Deleteing a Member Profile)
Membership | User | Existing Member Modifications
Continuing to utilize this Users-Groups.com site affirms your acceptance
of the policy specified at http://www.Users-Groups.com/policy/.